Document Type : Research Articles

Authors

1 Department of Electrical Engineering, University of Zanjan

2 University of Zanjan

Abstract

A direct torque control (DTC) controlled induction motor drive is presented in this paper. Quantization errors of current and voltage measurements are simulated and considered. To reduce the average quantization error and other offset errors of current and voltage measurement and eliminating the increasing integrator errors, a random dither signal is added to the truncating analog to digital converter (ADC) outputs. In this method, the analog to digital converter (ADC) mean error is reduced to zero and therefore integrator output error is mitigated. Proposed quantization method can improve the digital converter result, thus this method can decrease the current measurement result. Proposed quantization method can improve the digital converter result, thus this method can decrease the current measurement result. Thus, the torque and flux ripple were be decreased. Proposed ditter injection method can be used in Digital signal processor (DSP) or FPGA implemented applications. Experimental results show the performance of proposed method.

Keywords

Main Subjects

[1] Toh Ch. Ling, Implementation of Direct Torque Control of
Induction Machines using Digital Signal Processor (DSP)
and Field Programmable Gate Arrays (FPGA), Ph.D.
dissertation, Faculty of Elect. Eng., UniversitiTeknologi
Malaysia, Skudai, 81300, Malaysia, 2005.

[2] T. Sutikno, N. R. N. Idris, A. Jidin and M. N. Cirstea, "An
Improved FPGA Implementation of Direct Torque Control
for Induction Machines," in IEEE Transactions on
Industrial Informatics, vol. 9, no. 3, pp. 1280-1290, Aug.
2013.

[3] A. Taheri, Abdolrezarahmati, and ShahriyarKaboli,
Energy Optimization of Field Oriented Six-Phase
Induction Motor Drive, Advanced in Electrical and
Computer Engineering, May 2011.

[4] H. Masoumkhani and A. Taheri, "PI regulator-Based Duty
Cycle Control to Reduce Torque and Flux Ripples in DTC
of Six-phase Induction Motor," in IEEE Journal of
Emerging and Selected Topics in Power Electronics 2020.

[5] Henrik F. Lundin, Characterization and Correction of
Analog-to-Digital Converters , Ph.D. dissertation, KTH
School of Electrical Engineering, Stockholm, Sweden
2005.

[6] A. Taheri, Abdolrezarahmati, and ShahriyarKaboli,
Efficiency Improvement in DTC of Six-Phase Induction
Machine by Adaptive Gradient Descent of Flux, IEEE
Transaction on power electronics, 2012.

[7] A. Taheri, Abdolrezarahmati, and ShahriyarKaboli,
Compression of Efficiency in Different Switching Tables
in Six-Phase Induction Motor DTC Drive, Journal of
Power Electronic , 2012.

[8] R.A. Wannamaker , The Theory of Dithered Quantization ,
Ph.D. dissertation, University of Waterloo, Waterloo,
Ontario, Canada, 2003.

[9] R. K. Behera and S. P. DAS, Improved direct torque
control of induction motor with dither injection,
S ̄adhan ̄a Vol. 33, Part 5, October 2008.

[10] B. Stallaert, F. Doucet, J. Rys, A. Diallo, S. Chaigne, J.
Swevers, P. Sas, Application of dither control for
automotive wiper squeal, ISMA, 2006.

[11] M. Dzirasa, K. Cunefare, M. Montbrun, and V. Rastelli,
Burst Mode Dither Control of Automotive Brake Squel,,
INCE Conference, Vol. 111, 2002.

[12] Ken C. Pohlmann,
Principles of Digital Audio,
(McGraw-Hill Professional, 2005).

[13] M. H. Holakooie, M. Ojaghi and A. Taheri, "Direct
Torque Control of Six-Phase Induction Motor With a
Novel MRAS-Based Stator Resistance Estimator," in
IEEE Transactions on Industrial Electronics, vol. 65, no.
10, pp. 7685-7696, Oct. 2018
.
[14] R. H. Kumar, A. Iqbal and N. C. Lenin, "Review of recent
advancements of direct torque control in induction motor
drives a decade of progress," in IET Power Electronics,
vol. 11, no. 1, pp. 1-15, 1 12 2018.

[15] R. E. KodumurMeesala and V. K. Thippiripati, "An
Improved Direct Torque Control of Three-Level Dual
Inverter Fed Open-Ended Winding Induction Motor Drive
Based on Modified Look-Up Table," in IEEE Transactions
on Power Electronics, vol. 35, no. 4, pp. 3906-3917, April
2020.

[16] I. M. Alsofyani, Y. Bak and K. Lee, "Fast Torque Control
and Minimized Sector-Flux Droop for Constant Frequency
Torque Controller Based DTC of Induction Machines," in
IEEE Transactions on Power Electronics, vol. 34, no. 12,
pp. 12141-12153, Dec. 2019.

[17] Alireza shamsi
, “A new Mismatch cancelation for
Quadrature Delta Sigma Modulator,” International Journal
of Industrial Electronics, Control and Optimization, early
Access,
10.22111/ieco.2019.29632.1167.

[18] A. Taheri and N. asgari, “Sliding Mode Control of LLC
Resonant DC-DC Converter for Wide output voltage
Range in Battery Charging Applications,” International
Journal of Industrial Electronics, Control and Optimization,
Vol. 2, No. 2, pp. 127-136, 2019.