Document Type : Research Articles

Authors

1 Faculty of Electrical and Computer Engineering, Babol Noshirvani University of Technology, Babol, Iran

2 Department of Electrical Engineering, Faculty of Engineering and Technology, University of Mazandaran, Babolsar, Iran

10.22111/ieco.2026.56724.1791

Abstract

This paper presents a passivity-based voltage-regulation approach augmented by a nonlinear extended state observer (NESO) for a boost DC-DC converter in a DC microgrid supplying parallel resistive and constant-power loads. The constant-power load exhibits a negative incremental impedance that weakens converter damping and may degrade transient performance or even destabilize the system under load variations, source disturbances, and modeling uncertainties. The boost converter is described by a nonlinear averaged model in which the CPL is represented by its ideal constant-power characteristic within the practical positive-voltage operating region. Building on this model, the controller shapes the closed-loop energy and injects damping for output-voltage regulation, while the NESO estimates lumped disturbances, with the output-voltage-channel disturbance estimate used for compensation through the control law. The main contribution lies in embedding the NESO into a passivity-based control framework to enable online disturbance estimation and active compensation in boost converters feeding parallel resistive and constant-power loads. For the reported gains and tested scenarios, Comparative simulations against PI, PBC-only, and ENDO-assisted passivity-based control demonstrate faster voltage recovery, smaller voltage deviations, and lower tracking-error indices under CPL power variations, resistive-load changes, input-voltage disturbances, and reference-voltage changes.

Keywords

Main Subjects